MySensors Library & Examples
2.3.2
|
Software Two Wire Interface library.
Classes | |
class | I2cMasterBase |
Base class for FastI2cMaster, SoftI2cMaster. More... | |
class | SoftI2cMaster |
AVR Software I2C master class. More... | |
class | FastI2cMaster< sclPin, sdaPin > |
AVR Fast software I2C master class. More... | |
Variables | |
const uint8_t | STATE_STOP = 0 |
const uint8_t | STATE_REP_START = 1 |
const uint8_t | STATE_RX_DATA = 2 |
const uint8_t | STATE_TX_DATA = 3 |
const uint8_t | STATE_RX_ADDR_NACK = 4 |
const uint8_t | STATE_TX_ADDR_NACK = 5 |
const uint8_t | STATE_TX_DATA_NACK = 6 |
const uint8_t STATE_REP_START = 1 |
Repeated start condition transmitted.
Definition at line 42 of file SoftI2cMaster.h.
const uint8_t STATE_RX_ADDR_NACK = 4 |
Slave address plus read bit transmitted, NACK received.
Definition at line 51 of file SoftI2cMaster.h.
const uint8_t STATE_RX_DATA = 2 |
Read data transfer active.
Definition at line 45 of file SoftI2cMaster.h.
const uint8_t STATE_STOP = 0 |
Stop condition transmitted.
Definition at line 39 of file SoftI2cMaster.h.
const uint8_t STATE_TX_ADDR_NACK = 5 |
Slave address plus write bit transmitted, NACK received.
Definition at line 54 of file SoftI2cMaster.h.
const uint8_t STATE_TX_DATA = 3 |
Write data transfer active.
Definition at line 48 of file SoftI2cMaster.h.
const uint8_t STATE_TX_DATA_NACK = 6 |
Data byte transmitted, NACK received.
Definition at line 56 of file SoftI2cMaster.h.